Drills and Drill Bits
Grainger Ball End Mill Single End 1.00mm Carbide
The Grainger 14K357 is a 14 gauge, type 304 stainless steel wire cloth with a 2 mesh and 0.045 inch wire diameter. It has an open area of 36% and comes in a 48 inch width. The stainless steel construction makes it durable and corrosion resistant. With a fine mesh, this product can be used in various filtration, screening, and sieving applications. It is made in the USA.
Grainger Sq. End Mill Single End Carb 0.0150
The Grainger 14K487 is a 14 gauge, type 1 extension cord that is 50 feet long. It has a yellow jacket and is designed for indoor and outdoor use. The 3-wire grounded cord has a molded plug on one end and receptacle on the other end. It is UL listed and CSA certified. The 14 gauge wire allows it to handle up to 15 amps and 1875 watts. This commercial-grade extension cord can be used for power tools, appliances, lighting, and more.
Grainger Ball End Mill Single End 0.40mm Carbide
The Micro 100 Ball End Mill Carbide is a 2-flute ball end mill made of solid carbide with a TiAlN coating. It has a 1/4" shank diameter, 1/2" cutting diameter, and 2" overall length. The ball end geometry allows milling of 3D contoured surfaces. This end mill is designed for general purpose milling in most material groups like steel, stainless steel, cast iron, aluminum, and plastics. It provides good chip evacuation and can mill up to 50% radial engagement and 25% axial engagement. The TiAlN coating reduces heat and friction for faster cutting. The end mill has center cutting geometry for plunge cuts.
Grainger Face Mill MFPN 453000R5T MFPN 300
The Kyocera Face Mill is a high-performance milling cutter designed for face milling a wide range of materials. It features a 45 degree lead angle and variable helix flutes to provide smooth cutting action and good chip control. The cutter body is made of micro-grain carbide for wear resistance and coated with TiAIN to further enhance tool life. It has 6 flutes and is available in diameters ranging from 1" to 4". The maximum depth of cut is 0.787" and the maximum feed rate is 0.0039" per tooth. The face mill is balanced to G2.5 at 25,000 RPM and provides accurate, chatter-free milling in a wide range of applications.
Grainger Drill Mill 8.00mm Carbide AlTiN
The Grainger 16T643 is a 3/4 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor with a 1.15 Service Factor. It has a 48Y Frame with a 1" diameter shaft and is totally enclosed fan cooled (TEFC) for protection against dust and water. This motor can provide 0.56 kW of power with 81% efficiency and is CSA certified. With its standard NEMA dimensions, this versatile motor can be used for various industrial applications.
Grainger Threading Tool 5/16 Carbide
The Grainger 5/16"-18 carbide straight flute machine tap is made of solid carbide for durability and has straight flutes for efficient chip removal. It is designed for hand or machine tapping of ferrous metals like steel, cast iron, and alloy steel. The tap has a spiral point for easy starting and cutting edges with high wear resistance. It comes in a standard length of 2-1/2" with a square shank and is rated for moderate cutting speeds and feeds. Overall, this is a high quality carbide tap well-suited for tapping common sized threaded holes in hard metals.
Grainger Threading Tool 3/16 Carbide
The Grainger internal threading tools have a 3/16 inch shank diameter and are made of high speed steel. They feature a 60 degree threading angle and are available in multiple sizes including #4-40, #6-32, #8-32, #10-24, #10-32, and 1/4-20. The tools have an overall length of 3 to 4 inches depending on the thread size. They can be used for hand threading operations on lathes, screw machines, and machining centers. The high speed steel construction provides good wear resistance and cutting ability.
Grainger Threading Tool 1/8 Carbide
The Micro 100 Threading Tool is a high-speed steel threading tool with an 8mm shank diameter and 16mm maximum cutting diameter. It has a 60 degree threading profile and can cut metric, UN, and UNF threads. The overall tool length is 3.5 inches. This single-point threading tool allows both external and internal threading operations. It features TiN coating for increased tool life and lubricity. The Micro 100 threading tool is made in the USA.